FLOOR ADHESIVE

ClearWeld? is a quick-setting, multi-purpose, two-part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld? is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld? has a 1:1 mixing ratio, sets in 5 mins and cures in 1 hr. With a tensile strength of 4400 psi, ClearWeld? sets to a hard, permanent bond.

PlasticWeld? is a specially formulated two-part adhesive and epoxy filler system that provides for strong, lasting repairs. PlasticWeld? will bond a variety of surfaces, such as metal, composites, fiberglass and others. PlasticWeld? sets in 5 mins at room temperature and is fully cured in 1 hr. Using a 1:1 mixing ratio, PlasticWeld? combines to a tensile strength of 3200 psi and cures to an off-white color.

J-B KwikWeld? is a fast setting version of the original J-B WELD? two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld? has a 1:1 mixing ratio, sets in 6 mins and is fully cured in 4 to 6 hrs. J-B KwikWeld? cures to a dark gray color, is rated at a tensile strength of 2424 psi and will withstand temperatures up to 300 deg F.

J-B MarineWeld? is a specially formulated two-part epoxy cold weld system that provides for strong, lasting repairs for bonding different or similar surfaces, such as aluminum, metal, composites, fiberglass and others. MarineWeld? sets in 4 to 6 hrs at room temperature and is fully cured to a dark gray color in 15 to 24 hrs. Once cured, it can be shaped, tapped, filed, sanded and drilled and will retain its strength above or below the water surface.

WaterWeld? will plug or seal leaks and patch holes and cracks in almost anything. Ideal for repairing plumbing, fuel tanks, tub and shower, drains, pool and spa, boats and potable water tanks, setup occurs even under water. After curing, it can be drilled, tapped, filed, sanded and painted. WaterWeld? has a set time of 15 to 25 mins and sets hard in 1 hr. WaterWeld? cures to an off-white color, is rated at a tensile strength of 900 psi and will withstand temperatures up to 300 deg F.

SteelStik? is a hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal. After mixing, it forms an industrial-strength polymer compound that can be molded into shapes or used to buildup, patch and repair steel components. SteelStik? sets in 3 to 5 mins and after 60 mins, can be drilled, tapped, machined, ground, filed and painted. SteelStik? cures to a dark gray color, is rated at a tensile strength of 900 psi and will withstand temperatures up to 300 deg F.